Two-Way Radio Maintenance
Reading Time: 5 minutesPreventative radio maintenance checks are regular inspections that operate in the same way that you would service your car. If you don’t service your car regularly, you may be completely unaware of issues that are causing you trouble on a day to day basis.
Two Way Radio Maintenance
Preventative radio maintenance checks are regular inspections that operate in the same way that you would service your car. If you don't service your car regularly, you may be completely unaware of issues that are causing you trouble on a day to day basis.
The same thing can happen to your two-way radios or radio systems, think of them as a WOF for your communications system. Through these RF performance checks, it can ensured that nothing is getting in the way of radio communication in your workplace. As many industries have seasonal fluctuations, scheduling preventative maintenance checks before peak times can ensure that your day to day operations can continue without interruption.
You would be amazed at some of the radio faults that can be found. One hoist driver logged a fault that his radio wasn’t receiving – the simple answer was that the aerial was faulty. Recently carried out a radio audit and maintenance check on the Port radios and found missing radios,broken antennas and poor battery conditions . This meant coverage was greatly reduced, all it took was a simple antenna fixes to get a very happy radio users again; but without getting it checked, the problem may have continued unnoticed.
During Radio preventative maintenance checks,the following is done; physically inspect the radio equipment, remove any dust or foreign material from the radios as well as to measure, test, align , tune radios and antennas. Also, ensure that the radios are transmitting and receiving, evaluate battery condition and service life, as well as upgrade the radios to the most current firmware if necessary.
Two-Way Radio Maintenance
Critical Radio Maintenance
Below are some examples of services carried out under a preventative maintenance schedule:
- We will physically inspect the equipment removing any dust and foreign materials inside the radio
- Measure, record, test, tune and align your radio equipment
- Ensure correct receiving and transmitting frequencies are being used in the radio
- Evaluate radio battery condition and service life
- Check reflected power in the antenna lines of Port mobile radios and infrastructure repeaters
- Recalibrate Port radio equipment to original parameters based on CPS programming
- Upgrade with the most current firmware
Two-way radio care & maintenance guide
SEVEN REASONS your two-way radios need regular maintenance or repair
Here are seven reasons to bring your radios in for regular maintenance and repair.
1- We’ll Catch Issues Before They Hinder Performance.
A certain amount of wear and tear should be expected as a result of everyday use, especially if your projects take you to construction sites, the oil sands or other industrial settings.
But just because a problem seems minor doesn’t mean it should be ignored. Getting your two-way radio inspected and, (if need be) repaired when you first notice a performance issue will help prevent the problem from escalating and interfering with communication in the field.
Damage to the antennae, radio housings and volume controls are just a few of the problems our manufacturer-trained technicians diagnose and repair on a regular basis. And, because Tridon is a CSA-certified repair facility, we can inspect and repair intrinsically safe two-way radios, as well.
2- We’ll Inspect and Repair Your Accessories and Test Your Batteries, Too.
If your radio needs repairs, odds are your accessories do, too. Our service technicians will inspect, repair and clean them so they function at optimal levels.
We’ll inspect and test each battery as well to ensure they’re within their shelf-life and working within manufacturer specifications. If there is any question about a battery’s ability to get your team members through an entire shift, we’ll let you know that it’s time to recycle it and purchase a replacement.
If you have radios or accessories you want repaired,email servitek@xtra.co.nz
3- We’ll Test and Autotune Your Radios.
Autotuning is a process of testing your radio to make sure it functions within manufacturer specifications. At Servitek, we’ve made autotuning part of our two-way radio repair process. Our experienced, manufacturer-trained technicians know how to interpret the results of these tests and are fully equipped with the tools and software to make any necessary upgraded.
4- We Will Get Your Firmware and Software Up to Date.
Part of our radio inspection and repair process is making sure the firmware is up to date. Firmware is essentially what tells the radio components how to interact with each other. Having up to date firmware means that any improvements to these operating instructions, including new software related features, will be available to you.
If you have questions about Autotuning and firmware updates, we have the answers. Just email servitek@xtra.co.nz.
5- We’ll Clean Your Radios and Accessories
Cleaning the dust, dirt, and grime from radios does more than give them a ‘showroom shine’. It can actually mitigate frustrating performance issues, audio quality being one of them.
If your team works in dirty, dusty environments, like a construction site, airborne dust and dirt can get caught in the speaker grill. As this debris accumulates it can interfere with audio quality when you transmit and receive messages. Cleaning is part of our two-way radio repair process. This, along with Autotuning, will go a long way to helping your team communicate, frustration-free, on the job site.
6- You Can Discuss Your Project Needs with Communications Experts
Radio repairs might just be part of your communications solution. You might need to have your equipment reprogrammed so multiple teams can communicate on the same job site without delay or cross-talk. If your project will have your team spread over a wide area, you might need a repeater to provide coverage.
Licensing Consultants can help ensure you have exclusive access to the frequencies you need for the duration of your current project as well as for upcoming work, future-proofing your communication solution and allowing for private, secure communication.
Bringing your radios in for routine or critical repairs is an opportunity to talk to the experts and get all your bases covered.
7- We’ll Let You Know if it’s Time for a Replacement.
Some of your radios may be beyond the point of economical repair. If this is the case, your communication needs would be better served by investing in a replacement radio rather than repairing the damaged device.
If your equipment has reached this point, our Service team and Client Support Specialists will let you know and advise you on the best course of action. If buying a radio isn’t in your budget, Servitek can provide a rental solution that will fit your project’s needs.
Making two-way radio maintenance the first step in your project plan will mitigate the risk of downtime and lost production because of a gap in communications. It will also minimize the safety risks that come from failing communications equipment.
So, before sending your crews into the field, let us take a look at your radios. We’ll take care of them so they will be there for you.
Reference: https://discover.hubpages.com/technology/two-way-radio-maintenance
Ref: hubpages
MediaDownloader.net -> Free Online Video Downloader, Download Any Video From YouTube, VK, Vimeo, Twitter, Twitch, Tumblr, Tiktok, Telegram, TED, Streamable, Soundcloud, Snapchat, Share, Rumble, Reddit, PuhuTV, Pinterest, Periscope, Ok.ru, MxTakatak, Mixcloud, Mashable, LinkedIn, Likee, Kwai, Izlesene, Instagram, Imgur, IMDB, Ifunny, Gaana, Flickr, Febspot, Facebook, ESPN, Douyin, Dailymotion, Buzzfeed, BluTV, Blogger, Bitchute, Bilibili, Bandcamp, Akıllı, 9GAG