How to Make Your PopSockets Grip Sticky Again
Reading Time: 3 minutesPopSocket’s are great until they become loose or fall off entirely.
PopSockets are the coolest way to hold your smartphone, no matter which phone you own or how old you are. But what happens when you start using them for too long?
The adhesive gel starts to wear off, and you can no longer get a firm grip on the PopSocket. Here, we’ll show you how to fix your PopSockets so they’re sticky again!
What Are PopSockets and How Do They Differ From PopGrips?
PopSockets are customizable and reusable smartphone grips that add style, protection, and functionality to your phone. They’re easily the most effective way to hold or dock your smartphone.
The term ‘PopSockets’ comes from PopSockets LLC, a company founded by David Barnett that manufacturers popular electronic accessories and protective devices for smartphones. The appropriate term for these protective plastic grips would be ‘PopGrip,’ however, which we’ll use going forward.
They are divided into two parts—PopGrip is the plastic disc that sticks to the back of your phone with an adhesive gel. PopTops are the upper portion that can be removed or replaced as required. These two gadgets combined allow you to grip your phone or other devices, such as a tablet or an Amazon Kindle, securely.
PopGrips come in a variety of colors, shapes, and sizes. They are made of plastic—more specifically, polycarbonate, thermoplastic polyurethane, and polyurethane, making them lightweight but strong. You can pop or mount your phone or pull the grip out to use as an open-ended stand.
These easy-to-use devices are great for those who want an easy hack to hold onto their phone without worrying about dropping it or accidentally dropping it.
How to Make Your PopGrip/PopSockets Grip Sticky Again
The sticky grip on a PopGrip is essential for getting the most out of your phone. If not, you must know how to fix your PopGrip with these easy and quick tips.
1. Rinse or Soak Your PopGrip
You can gently rinse or soak your PopGrip (the grip only) in cold water for not more than fifteen seconds. Consider using rubbing alcohol to remove any stubborn stains and greasy bits. Then, rinse again and air-dry it for not more than ten minutes, as it causes the gel to dry up. Here’s how to do this:
You can also wipe the base dry with a napkin or dry towel. Using a lint roller to clean excess debris from the back of the phone or case can work as well to improve adhesion.
2. Get a Replacement Adhesive
Plenty of high-quality, industrial-strength replacement adhesives are available on sites like Amazon—sticker pads, adhesive bases, and more.
You may use hot glue; however, it’s tricky. Apply the hot glue on your phone’s case, and not directly on your phone.
Getting the gel to come off the first time might be harder. Instead, use dental floss or the back of a credit card and slide it gently beneath the surface. While you’re at it, try adding a few drops of water to the base of your socket to re-activate the adhesive gel and use it again.
If you aren’t always comfortable using a PopGrip, we recommend checking out these DIY phone stands you can make in less than five minutes.
3. Use 3M VHB Tape or Double-Sided Tape
If nothing works, you can always use a workaround—apply a layer of 3M VHB (Very High Bonding) tape or double-tape (adhesive-side up) over the base of the PopGrip, and then press them down firmly onto the back of your phone or tablet until they’re secure enough without sliding around excessively during use.
4. Apply a Gentle Source of Heat
Use a hair dryer on low heat to warm up the area where your PopGrip isn’t sticking. This will make the adhesive melt ever so slightly and spread out uniformly to stick on better.
5. Use a Suitable Phone Case
It is important to note that PopGrips won’t stick properly on hard materials like silicon or leather. It’s likely to damage them instead while repositioning. Further, some naked-base models of iOS devices or other premium brands like Samsung’s flip phones may not provide the required grip due to their surface texture.
Consider using a phone case with a compatible texture and material, such as metal, plastic, or glass.
Fix Your Worn-Out PopGrips
PopGrips can be reused for a long time if you take care of them properly, and these helpful tricks for cleaning and keeping your PopGrip in good condition should help out.
If you’re dealing with a severely worn-out grip, it may be time to consider buying a new one, but until then, these tricks should help you reuse your PopGrip and have it perform like brand-new.
Reference: https://www.makeuseof.com/how-to-make-a-popsockets-popgrip-sticky-again/
Ref: makeuseof
MediaDownloader.net -> Free Online Video Downloader, Download Any Video From YouTube, VK, Vimeo, Twitter, Twitch, Tumblr, Tiktok, Telegram, TED, Streamable, Soundcloud, Snapchat, Share, Rumble, Reddit, PuhuTV, Pinterest, Periscope, Ok.ru, MxTakatak, Mixcloud, Mashable, LinkedIn, Likee, Kwai, Izlesene, Instagram, Imgur, IMDB, Ifunny, Gaana, Flickr, Febspot, Facebook, ESPN, Douyin, Dailymotion, Buzzfeed, BluTV, Blogger, Bitchute, Bilibili, Bandcamp, Akıllı, 9GAG